Views: 288 Author: Site Editor Publish Time: 2026-11-09 Origin: Site
A DAC wheel bearing is a double row angular contact ball bearing commonly used in automotive wheel hub systems. It supports radial and axial loads while allowing wheels to rotate smoothly with minimal friction. DAC bearings are widely used in passenger cars and other compatible vehicle applications because of their compact structure and ability to handle forces from different directions.
DAC wheel bearings are available in various sizes, sealing configurations, and internal designs. Their part numbers often indicate important dimensional information, making them easier to identify during replacement and purchasing.
Understanding DAC wheel bearing sizes, types, and applications helps automotive repair professionals, parts distributors, and wholesale buyers select suitable bearings for specific vehicles.
A DAC wheel bearing is a double row angular contact bearing designed to support wheel rotation while carrying radial and axial loads. Its two rows of rolling elements provide stable support for automotive wheel hub applications.
DAC bearings typically contain an outer ring, inner rings, rolling elements, a cage, and sealing components. The angular contact arrangement allows the bearing to support loads acting both perpendicular and parallel to its rotational axis.
During vehicle operation, wheel bearings experience forces generated by vehicle weight, acceleration, braking, and cornering. The double row structure distributes these forces through the rolling elements and raceways.
Many DAC wheel bearings are supplied with lubricant and protective seals. These features help protect internal components from contamination and reduce the need for routine lubrication. However, the exact construction depends on the bearing specification and intended application.
DAC bearings offer several characteristics that make them suitable for automotive wheel systems.
1.Double row construction supports combined radial and axial loads.
2.Compact dimensions allow installation within compatible wheel hub structures.
3.Sealed designs help retain lubricant and prevent contamination.
4.Precision raceways support smooth and consistent wheel rotation.
5.Various dimensional configurations accommodate different vehicle applications.
These features make DAC bearings common components in automotive replacement and aftermarket distribution.
DAC wheel bearing sizes are generally identified by three principal dimensions: inner diameter, outer diameter, and width. These measurements are expressed in millimeters and determine the bearing's basic mounting compatibility.
The inner diameter refers to the central bore that interfaces with the hub or shaft. The outer diameter determines the required housing size, while the width affects the bearing's axial positioning.
DAC bearing numbers often contain these measurements. For example, DAC35650035 generally represents a bearing with a 35 mm inner diameter, 65 mm outer diameter, and 35 mm width.
However, not all DAC designations follow an identical numbering pattern. Some models include additional codes or variations, making technical documentation important for accurate identification.
Common DAC Bearing Size Examples
DAC Bearing Number | Inner Diameter | Outer Diameter | Width |
|---|---|---|---|
DAC25520037 | 25 mm | 52 mm | 37 mm |
DAC30600037 | 30 mm | 60 mm | 37 mm |
DAC34640037 | 34 mm | 64 mm | 37 mm |
DAC35650035 | 35 mm | 65 mm | 35 mm |
DAC40720037 | 40 mm | 72 mm | 37 mm |
These examples illustrate commonly referenced DAC bearing dimensions. Actual product specifications and compatibility should be confirmed before replacement.
Correct dimensions ensure the bearing fits the intended installation position.
An incorrect inner diameter may prevent proper mounting on the hub, while an unsuitable outer diameter can affect the fit within the housing. Incorrect width may also interfere with the positioning of surrounding components.
Although matching dimensions is essential, external measurements alone do not guarantee interchangeability. Internal construction, sealing arrangements, and vehicle application requirements must also be verified.
DAC wheel bearings are available in different structural and sealing configurations, including conventional double row angular contact ball bearings and application-specific designs with integrated sealing or wheel speed encoder features.
The most common DAC configuration uses two rows of angular contact balls. This arrangement supports combined loads in both axial directions and provides stable wheel rotation.
Some DAC bearings incorporate additional features such as retaining ring grooves, specialized seals, or magnetic encoder rings. These variations are designed to meet specific installation and operating requirements.
Not every DAC bearing has the same internal construction or additional features. Buyers should confirm the complete product designation and technical specifications rather than assuming all DAC bearings are interchangeable.
Sealed DAC bearings include protective elements designed to retain lubricant and reduce contamination from water, dust, and other external particles.
Open designs do not provide the same integrated sealing protection and may require different lubrication or installation arrangements.
For automotive wheel applications, sealed configurations are commonly preferred where protection against road contaminants is necessary.
The correct sealing design should always match the vehicle's original bearing requirements.
Some DAC wheel bearings contain magnetic encoder rings used by wheel speed sensing systems.
These encoders work with compatible sensors to provide rotational speed information to the vehicle's electronic control system.
When replacing a bearing equipped with an encoder, both the encoder configuration and installation orientation must be verified. A bearing with matching dimensions but incompatible electronic features may not function correctly in the intended application.
DAC wheel bearings are primarily used in automotive wheel hub applications, including compatible front and rear wheel assemblies. Their double row construction makes them suitable for supporting wheel rotation under combined radial and axial loads.
Passenger vehicles commonly use DAC bearings where compact wheel hub designs require reliable rotational support.
Depending on the vehicle's construction, a DAC bearing may be pressed into the steering knuckle or another suitable housing. The wheel hub is then installed according to the specified assembly procedure.
DAC bearings may also be used in certain light commercial vehicles and other automotive applications. However, vehicle type alone cannot determine which bearing is suitable.
Front wheel bearings often operate within steering assemblies and experience changing loads during cornering and braking.
Rear wheel bearings perform similar rotational support functions but operate within different axle and suspension configurations.
Some vehicles use separate DAC bearings at one or both axles, while others use complete wheel hub bearing units.
Therefore, buyers should confirm the original bearing reference and installation position before choosing a replacement.
DAC bearings are commonly supplied as replacement components for compatible wheel hub systems.
Repair professionals may replace a worn DAC bearing while retaining the original hub, provided the vehicle design allows individual bearing replacement and the surrounding components remain serviceable.
For automotive parts distributors, DAC bearings provide a product category that can be organized by size, part number, and vehicle application.
Accurate product identification helps buyers distinguish between different specifications and select appropriate replacement bearings.
Choosing the correct DAC wheel bearing requires matching the original part number, bearing dimensions, internal design, sealing configuration, and vehicle application. Similar appearance or dimensions alone should not determine compatibility.
The first step is to identify the original bearing number. This may be available on the existing component or through the vehicle's technical parts catalog.
Next, compare the replacement bearing's inner diameter, outer diameter, and width. Any additional features, including retaining ring grooves or magnetic encoders, must also match the original requirements.
Finally, verify the bearing's intended vehicle application. Different production years, drivetrain configurations, and axle positions may require different bearings.
Several mistakes can occur when selecting DAC bearings.
Choosing a bearing based only on its external dimensions.
Ignoring suffixes or additional product codes.
Overlooking ABS encoder compatibility.
Confusing individual DAC bearings with complete wheel hub assemblies.
Selecting a product without verifying the vehicle application.
These mistakes can lead to incorrect replacement part selection or installation difficulties.
For wholesale purchasing, technical drawings and verified cross-reference information provide additional support when comparing replacement options.
Wholesale buyers should prioritize accurate product specifications, verified application references, consistent manufacturing quality, and clear technical documentation when sourcing DAC wheel bearings.
DAC bearings are available in numerous dimensional configurations, making correct part identification particularly important for bulk orders.
Purchasing teams should provide complete bearing numbers, required dimensions, and vehicle application information when requesting quotations.
Where applicable, buyers should also confirm sealing arrangements, encoder requirements, and any additional design features.
For distributors managing multiple DAC bearing models, organized product references help simplify inventory control and customer inquiries.
Clear labeling and suitable protective packaging are also important for identifying products and protecting precision bearing components during storage and transportation.
Reliable technical communication between suppliers and purchasers helps reduce ordering errors and supports efficient automotive replacement parts distribution.
DAC wheel bearings are double row angular contact bearings designed to support smooth wheel rotation and combined operating loads. Their different sizes, sealing configurations, and application-specific features allow them to serve a wide range of automotive wheel hub systems.
Understanding DAC bearing dimensions and construction is essential for identifying suitable replacements. While part numbers often provide useful size information, compatibility should also be confirmed through vehicle applications and technical specifications.
For automotive parts distributors and wholesale buyers, accurate identification supports more efficient sourcing and inventory management.
Explore our DAC wheel bearing products or contact our team with your required part numbers, dimensions, and purchasing quantities to discuss suitable automotive bearing solutions.